Welcome: Ningbo EcoTrust Machinery Co.,Ltd.


Two-Color Injection Molding Machine

  • Parallel Clean Two Color Injection Molding Machine CPS850
  • Parallel Clean Two Color Injection Molding Machine CPS850
  • Parallel Clean Two Color Injection Molding Machine CPS850
Parallel Clean Two Color Injection Molding Machine CPS850Parallel Clean Two Color Injection Molding Machine CPS850Parallel Clean Two Color Injection Molding Machine CPS850

Parallel Clean Two Color Injection Molding Machine CPS850

  • Intelligent PC & Network
  • Servo Motor Energy Saving
  • High Efficiency & Short Cycle
  • Environmental Low Consumption
  • Product description:

★When the rotary table rotates, it does not contact with the pressing plate, so as to reduce the failure caused by wear; before closing the mold, make accurate positioning of the rotary table to ensure the safety of the mold.
★Independent double ejection cylinder, powerful ejection.
★The well-designed high-efficiency servo drive gear transmission structure is characterized by fast rotation, stable rotation and accurate stop position.
★Upgrade the configuration, pull rod, eject guide sleeve with graphite copper sleeve, two plates, and tail plate sliding foot with graphite copper block to ensure fast and accurate opening and closing of the mold.
★The motor-driven formwork is equipped with a rotary table rotating 180 degrees to and fro, and two sets of molds can be placed to produce products with two distinct colors.
★Single cylinder injection structure can effectively avoid the cylinder pressure deviation of double cylinder injection mechanism, and the injection is more stable and accurate.
★Linear guide rail is adopted for glue injection, with good guidance and small resistance.
★ The length diameter ratio of all screws is 20:1, and the installation space of each type of screw launching platform is reserved for more convenient use.

Technical Parameter:

international size rating /UNIT 1 /UNIT 2
mm 40 50 50 55
Screw L:D ratio L/D 20 20 20 20
Shot volume cm3 283 442 442 535
Shot weight(PS) g 257 402 402 486
oz 9.1 14.2 14.2 17.2
Injection pressure Bar 1960 1254 1638 1354
Injection rate cm3/s 218 340 326 394
Plasticizing capacity g/s 27 48 48 59
Injection stroke mm 225 225 225 225
Injection speed mm/s 173 173 166 166
Max.screw speed r/min 320 320 320 320
Clamping force kN 8500
Opening stroke mm 1000
Space between tie bars mm 1060x1010
Die Height(Min-Max) mm 400-1100
Rotary Table Diameter mm 1450
Ejector stroke mm 140
Ejector force kN 70x2
Number of ejector pcs 5x2
Distance Berrel Centers mm 700
Systerm pressure Bar 160
Pump motor kW 28.3 36.7
Heating capacity kW 12.3 12.3 17.3 17.3
Number of temp zones
Oil tank capacity L 1100
Machine dimension(L×W×H) m×m×m 11.2x3.05x2.75
Machine weight t 85
Hopper capacity kg 25 25

We Crate Advantages:
>High Quality >High Efficiency >High Precision >Energy-Saving
>High Performance-Price Ratio
The CPS injection molding machine inherits the original Germany and Italy design and high-quality manufacturing technology and it's assembled in China.
According to the customer's choice and actual demand, optimize the combination of clamping, injection and driver unit to satisfying all the requirements of customers and it's also keep high efficiency.
>High repetition precision
The CPS serial injection molding machine optimizes injection process, guarantees repeated fling and consistent high-quality injection. Precision injection molding can be comparable to full electricity.
The CPS serial injection molding machine uses the high-quality components. It can work efficiently for a long time. Strong and durable, needn't the frequent maintenance.
Designed Point 1: Clamping Unit

>Larger space between tie bars, suitable for larger molds and multi-cavity necessary.
>Longer and wider guide length, higher repeatability precision, improving products quality and mold working-life.
>Upgraded parts, Graphite-copper bushes and slider used on tie-bar, ejector and movable platen, ensure fast and precise mold close and open.
>Better designed mechanical structure and toggle system, faster cycle time, and improve production efficiency.
>European type ejector structure, larger space, convenient for maintenance.
>Prepared enough space for upgrade and retrofits.
>Built-in and adjustment free mechanical safety bar, more safe and convenient.
>Much higher rigidity mechanical system than normal Chinese IMM, not only improve machine's using life, but also can protect mold.
Designed Point 2: Injection Unit

>Wide variety injection unit with modular design can be provided depending on the features of molded products.
>Full supported injection unit with dual precise linear guide rails, ensure the best precision and fast start speed.
>Dual carriage cylinders improve a better injection precision.
>Injection unit steel pipes adopt pipe fitting to connect, no welding design ensure maintenance and after-service to be easier.
>Mobile nozzle shield makes production and maintenance easier.
>Imported high quality SKD61 material screw tip, check ring and thrust ring; a lot kinds of screws design can meet different plastic material and special processing injection molding needs.
>The high torque and high speed hydraulic motor is used in the plasticizing motor with high efficiency and high response.
>Double layer insulated material barrel, effective heat insulation, prevent scald, safer production process.
>Roller slide structure to facilitate customers to change raw materials.
Designed Point 3: Hydraulic System
>Standard equipped with precise and energy saving servomotor system, energy saving capacity can reach to20%~80% than traditional injection machine.
>World famous brands hydraulic parts ensure machine's reliability and fast response speed.
>Visible and dischargeable oil tank, easy for hydraulic circuit maintenance.
>Adopt modular adaptor valve blocks, hydraulic circuit and functions easy for up-grade and maintenance Effective reduce pressure loss and improve responsiveness.
>Self-sealed magnetic suction filter, make your maintenance more convenient.
>Logical distribution of pump oil suction port, oil tank oil outlet and hydraulic pipe fits, easy for maintenance.
>Germany DIN standard hydraulic pipe fitting with seal, G screw thread style plug, avoid oil pollution
Designed Point 4: Electric Part
>World well-known brands electric parts.
>The high quality color liquid crystal controller, and the power system manufacturer cooperation research and development, the control is precise, the response speed is quicker, the powerful software control function, satisfies more different craft request.
>Standard equipped LED three-color tower light with alarm, machine working situation is clear.
>Modernized network management function available.
>Water-proof rubber seal used on electric cabinet ensure high safety.
>Machine program according to CE safety standard.
Designed Point 5: Servo Energy-Saving System
>The direct drive connection between the servo motor and the gear pump, provides excellent drive torque giving maximum acceleration and deceleration speeds for all machine functions. The patented drive system is a true advantage for high stability and repeatable molding conditions.
>The servo drive system provides significant cost savings for machine energy consumption compared to traditional hydraulic drive systems.
>The consumption of hydraulic oil cooling water is dramatically reduced due to the on-demand control of the servo drive system. Only the required quantity of oil is used during each stage of the machine cycle, which eliminates bypass oil wastage as found in traditional hydraulic systems.


EcoTrust-Double Color Injection Molding Machine Photos.

More details,please click the below quick links.

Please Click The Below Quick Links,Find Out Suitable Machine Model.







More details,please click the below quick links.

Please Click The Below Quick Links,Find Out Suitable Machine Model.

SK 140-2800 Ton Injection Molding Machine

160-530 Ton PET Injection Molding Machine

Full Electric Injection Molding Machine

Two Platen Injection Molding Machine

Two-Color Injection Molding Machine

Nylon Tape Injection Molding Machine

High Speed Injection Molding Machine

Medical Injection Molding Machine

Crates Injection Molding Machine

BMC Injection Molding Machine

Injection Stretch Blow Molding Machine

Key words:Plastic Injection Molding Machines,Plastic Injection Molding Solutions,

China Plastic Injection Molding Machines,Ningbo Plastic Injection Molding Machines,

Guangdong Plastic Injection Molding Machines

EcoTrust,Eco+Trust Create Value.


Scan the qr codeClose
the qr code